A scuba tank carrier by Shark Bite Scuba®

25.5L x 17W x 14.5H inches (64L x 43W x 36H cm)

Swap-out Sand Tires to All-Terrain Tires in under 2-minutes

• Your tank and weight belt can exceed 70 pounds (31.7 kg) for a cold water dive
  
  
• Without your Tank Dolly®, you will hand-carry 70 pounds (31.7 kg) of gear, up to a half-mile, to and from your dive boat and the dive site
  
  
• A dive bag is not designed to carry a scuba tank and weight belt
  
  
• The average diver carries 30 pounds (13.6 kg) of scuba gear in a dive bag
  
  
• A dive bag is not designed to carry 70% of the total weight of the average diver's gear

• Your Tank Dolly® solves this common problem that all divers experience

• 1 Tank Dolly® is designed to roll 1 or 2 scuba tanks, BCDs, and weight for 2 divers
  
  
• Interchangeable All-Terrain Tires, Sand Tires, and 3 models of scuba tank straps

Accessories:

• Fin Holder: Holds 4 XL fins
  
  
• Mesh Gear Bag: Stores lightweight dive gear

Practical application of your Tank Dolly® with the STB-34C Tank Strap: 

• Before boarding the boat, attach your BCD and 1st stage to your tank
  
  
• Clip your regulators and gauges to your BCD
  
  
• Clip additional gear to your BCD or backplate
  
  
• Roll your fully assembled rig from the parking lot to the boat and the dive site
  
  
• The Tank Dolly® eliminates the need to assemble your rig on a crowded boat while crossing rough water

• The Oval Handle detaches from the Tank Brace
  
  
• The Tank Brace pivots forward and downward
  
  
• If left unattended, your Tank Dolly® is designed to be locked to a fixed object

• Solid All-Terrain Tires: Maximum load of 300 pounds (136 kg)
  
  
• All-Terrain Tires traverse any solid surface
  
  
• Pneumatic Sand Tires: Maximum load of 176 pounds (80 kg)
  
  
• Sand Tires traverse any terrain such as a rocky trail, an asphalt parking lot, snow, mud, and deep soft sand

• The Tank Dolly® use polyester tank straps that have superior resistance to saltwater, abrasions, mold, and UV rays
  
  
• A polyester strap will not stretch and has low water absorption qualities
  
  
• Military-grade, high strength, Acetal buckles can support 250 pounds (113 kg) which is 5x the weight of a single scuba tank

• 6.5 feet (2 m) of weld secures all the joints of The Tank Dolly® (Yes, that's 78 inches (198 cm) of TIG weld!)
  
  
• Marine-grade 6063-T52 and 5052-H32 aluminum frame
  
  
• 316, 304, and 301 stainless-steel axle and hardware
  
  
• Rubber bumpers and non-skid tape stabilize your tanks and protect your Tank Dolly®
  
  
• 🇺🇸Made in the USA ⏤ 10-year limited warranty covers 100% of the aluminum frame, stainless-steel axle, and hardware to be free of defects in materials and craftsmanship

• Holds 4 XXL integrated BCD weight pouches
  
  
• Holds 2 XXL weight belts
  
  
• Holds trim and ankle weights
  
  
• The top of the Weight Box is lined with non-skid tape to stabilize your tanks and protects the surface
  
  
• The Tank Platform supports tank diameters from 5.5 to 8 inches (13.9 to 20.3 cm)
  
  
• The Tank Platform support Doubles, CCR, and DPV

• The Fin Holder is sold as an accessory
  
  
• Bolts to the rear of your Tank Dolly®

• Superior resistance to saltwater, UV rays, and mildew
  
  
• Material: 100% Polyester Scrim (1000 Denier mesh) PVC (vinyl) coated
  
  
• Dimensions: 18L x 14H (46L x 36H cm)

• Drawstring closure and adjustable Velcro straps