Overview: 3 interchangeable tank straps ⏤ The Tank Dolly®

---

• Secure 1 or 2 tanks independent of the other ⏤ without a BCD or a backplate, harness, and wing attached to either tank

• Secure 1 or 2 scuba tanks independent of the other ⏤ with a BCD or backplate, harness, and wing attached to each tank

• Secure 2 scuba tanks connected by tank bands, a manifold, and attached to a backplate, harness, and wing
  
  
• Doubles are also referred to as Twins

• Your Tank Dolly® includes 2 polypropylene Anchor Straps that are bolted to the Tank Brace
  
  
• All 3 tank strap models  (STO-08D, STB-34C, and DTS-28L) connect to the 2 Anchor Straps
  
  
• The Anchor Straps are standard on each Tank Dolly®
  
  
• The diver selects the model of the tank strap on our shopping page

• The Tank Dolly® is not designed to carry 1,200 pounds (544 kg) ⏤ We're just saying our straps will not fail!
  
  
• Polyester webbing: 2 inches wide (5 cm)
  
  
• Superior resistance to UV rays, mold, mildew, and rot
  
  
• Polyester webbing will not stretch
  
  
• Superior abrasion resistance
  
  
• Low water absorption  

• 1 buckle supports 5x the weight of a scuba tank
  
  
• 1 scuba tank seldom exceeds 50 pounds (22.6 kg)
  
  
• Our buckles have a 250 pound (113 kg) breaking strength rating
  
  
• MSR 2.0 (Military Side Release) buckles conform to the high standard of life-supporting gear
  
  
• The quick-release buckle allows the diver to easily remove and secure your tanks
  
  
• Double locking and double side release buckles

Buckle material:  

• U.S. Government Berry Amendment Compliant (10 U.S.C. §2533a) buckles and hardware
  
  
• Polyoxymethylene (Acetal), military-grade, high strength plastic, high stiffness, low friction, and has excellent dimensional stability for longevity
  
  
• 🇺🇸 American Cord & Webbing Company has been in business for over 100 years (since 1917) and their products are Made in the USA  

We do at Shark Bite Scuba® ⏤ Shark Tip:

• Use a carabiner with a 1/4 inch (6 mm) or less diameter
  
  
• Place the carabiner through the bottom 1/4 inch (6 mm) hole on the Tank Brace
  
  
• Clip the strap's 316 stainless-steel D-ring to the carabiner
  
  
• This procedure can be used with all of our straps (DTS-28L, STO-08D, and STB-34C)