A scuba tank carrier by Shark Bite Scuba®

image29

image30

Overview of The Tank Dolly®

Designed for the professional and the avid diver to roll their heaviest gear

  • Transport 1 or 2 scuba tanks, BCD, 1st stage, regulators, and gauges


  • Transport 4 XL fins


  • Plenty of weight for 2 divers


  • Store additional dive gear such as masks, snorkels, hoods, gloves, and an SMB in our Mesh Gear Bag

How heavy is wet scuba gear?

A single scuba tank, BCD, 1st stage, regulators, gauges, and weight belt for a cold-water dive can commonly exceed 80 pounds (36.2 kg) 

image31

Roll your heaviest gear to the boat or the dive site

Just because you can carry your dive gear ⏤ Doesn't mean you have to

  • The Tank Dolly® eliminates the need for multiple trips to and from your vehicle, dive site, and boat


  • The Tank Dolly® allows you to transport your fully assembled rig to your final destination


  • The Tank Dolly® eliminates the need to assemble your rig on a crowded boat and while crossing rough water


  • The Tank Dolly® was designed to be locked to a fixed object when left unattended

How far is the dive site from where you park?

The walk to your dive site can exceed a 1/2 mile (800 m) round-trip

image32

Interchangeable Tank Straps and Tires

Customize your Tank Dolly® with Sand Tires, All-Terrain Tires, and 3 tank straps

  • Your Tank Dolly® can be used with Sand Tires and All-Terrain Tires


  • Swap-out the tires and the axle in less than 2 minutes with the easy to remove cotter-pins


  • All-Terrain Tires maximum payload: 300 pounds (136 kg)


  • Sand Tires maximum payload: 176 pounds (80 kg)


  • Special order Sand Tires maximum payload: 242 pounds (110 kg) ⏤  (uncommon requirement)

What model of tank strap do I need?

  • 3 Interchangeable straps accommodate any size and configuration of a scuba tank, BCD, backplate, and wing, including:


  • Doubles or Twins


  • CCR (Rebreather)


  • DPV (Diver Propulsion Vehicle)

image33

The Tank Dolly® dimensions

Collapsible for convenient storage

  • Height with the handle attached: 45 inches (114 cm)


  • Height without the handle attached: 20.25 inches (51.4 cm)


  • Height when fully collapsed: 14.5 inches (36.8 cm)


  • Length: 19 inches (48.2 cm)


  • Width: 17 inches (43.1 cm) with tires attached


  • Weighs: 18.5 pounds (8.4 kg) with the All-Terrain Tires


  • Weighs: 19 pounds (8.6 kg) with the Sand Tires

  • Non-skid tape stabilizes the tanks and protects the surface of the Weight Box

  • 24 drainage slots in the Weight Box prevents standing water


  • Collapsible and stores in an area as small as 25.5L x 17W x 14.5 inches (64.7L x 43.1 x 36.8H cm) with the tires attached


  • Fits inside of a large, empty rolling dive bag


  • Generally, divers do not fly with scuba tanks, however; The Tank Dolly® will fit inside of a large suitcase to accommodate the divers who are the exception to this rule

Weight Box dimensions

  • Length: 19 inches (48.2 cm)

  • Width: 7.38 inches (18.7 cm)

  • Height: 5 inches (12.7 cm)

  • 700 cubic inches of cargo storage (11 liters)

  • Front lip: 2.75W x 19L inches (10W x 48.2L cm)

  • Rear lip: 2.25W x 19L  (5.7W x 48.2L cm)

  • Opening between the front and rear lip of the Weight Box: 4.5W x 19L inches (11.4W x 48.2L cm)

image34

The Fin Holder and The Mesh Gear Bag

Sold as accessories:

  • The Fin Holder secures 4 XL fins


  • The Mesh Gear Bag stores small, lightweight gear such as masks, snorkels, gloves, hoods, finger spools, SMB, multi-tool, sheath knives or shears, a save-a-dive kit, and a small first aid kit

Both accessories attach to the rear of The Tank Dolly®:

  • Every joint of the Fin Holder is TIG welded for durability and strength

image35

The Tank Dolly® is Proudly Made in the USA

Designed, Manufactured, and Assembled in Southern California:

  • 100% of the aluminum frame


  • 100% of the aluminum Fin Holder


  • 100% of the stainless-steel axle and hardware


  • 100% of the Mesh Gear Bag


  • 100% of the polyester tank straps and military-grade buckles


  • The Sand Tires are made from 100% USA material but manufactured abroad


  • Shark Bite Scuba® is seeking a tire company that manufactures marine-grade tires in the USA

Warranty and Return Policy:

  • All limited warranties guarantee 100% of the specified products to be free of defects in materials and craftsmanship

  • 10-year limited warranty: aluminum frame, stainless-steel axle, and hardware

  • 2-year limited warranty: All scuba tank straps

  •  1-year limited warranty: Sand Tires and All-Terrain Tires

  • 30-day return policy: Return The Tank Dolly® and any Shark Bite Scuba® accessory within 30 days for a 100% refund (excluding shipping)